New

Celsius, a new solid fuel water-heating boiler, is TMF’s pit-type boiler of prolonged burning with a capacity of 20 kW

The only difference from the previous Celsius is its capacity.

Duration of the boiler burning using one full fuel load may reach 12 hours.

Thanks to the prolonged stable burning, frequency of a new fuel load is reduced to minimum.

It is the main advantage of the boiler.

The customer is not distracted from his/her businesses or rest by adding fuel to the boiler very often.

Celsius boilers are designed for water heating of single-family houses and utility buildings equipped with water heating systems with forced circulation of a heat-transfer agent under operating pressure of 0.3 mPa (3 kg/cm²) maximum.

The boiler is able to heat multi-storey buildings with premises of irregular shape.

Celsius has an integrated flue heat-exchanger with vertical pipes

The vertical pipes of the heat-exchanger provide efficient intake of the stack gases’ temperature, which increase water heating before supplying it to the heating main.

The boiler’s body covered with a heat insulation material in order to increase its energy performance. Boiler’s coefficient of efficiency is 90%.

Prior to release, each TMF’s boiler is put through the hydraulic-pressure test to estimate its air-tightness and durability of the welded joints providing high quality and reliability of all the goods.

There are three doors in the boiler: for fuel load, heat exchanger cleaning and for boiler ignition. Each door has its own locking mechanism.

Snap for the load door and a thumb nut on the heat-exchanger’s door providing its tight fixing.

Large easy-to-use door of the heat-exchanger makes it easy to clean.

Remove the lid located behind the furnace in order to remove deposition remaining at the boiler’s bottom after cleaning of the heat-exchanger. Remove the ash drawer beforehand.

Ignition door is covered with refractory plates in order to protect it from overheating caused by direct fire impact.

It also provides protection from burns if you accidentally touch the door.

Primary and secondary air is supplied through the damper in the fire door ensuring the boiler’s operation.

All the doors have sealing on the edges. It should be particularly mentioned that the 18 mm sealing thread of the two upper doors ensures their tight and safe adjoining to the boiler’s body.

Colour coding of the thread and the areas of its adjoining with the body is the additional warranty of a safe and precise fixing of all the doors. The doors are set precisely according to the colour coding when closed.

There is a handle of regular-acting gate valve for stack gases inside the boiler in the right upper corner of the body.

It is turned by the fast ignition and heating of the furnace and flue pipe until there is draught for further operation of Celsius.

There are holes with damper for tertiary air supply in the middle of the side walls. It is designed to control the flame’s colour.

The values of the flame’s colour are provided in the Operating Manual.

There is the heat-resistant plate in the area of tertiary air supply for additional protection of the boiler’s body from high heat and its deformation. It has positive effect for the service life of the boiler.

Celsius is equipped with the cleaning mechanism (poker) in order to clean the furnace grate from combustion products.

Unlike its competitors, the poker of the new boiler cleans all the openings between bars of the furnace bar evenly.

During operation of the equipment using coal it is necessary to shake the furnace bar up by pokers’ handle in order to avoid clogging and insufficient air supply.

Therefore ash and slag falls through the furnace bar directly into the ash drawer.

There is the folding-back gate with holes in order to eliminate falling of the burning fuel when opening the furnace’s door.

In order to light the boiler open the door or light the boiler through it. It also provides access to the furnace bar for its thorough cleaning by the slag cutter, for example.

An easy-to-use poker with double side axial bearing is supplied together with the boiler. It is designed for cleaning pipes of the heat-exchanger using its half-round side and cleaning the flat boiler’s walls using the second curved side.

The boiler is equipped with thermometer, which measures temperature of the heat-transfer agent, for safe and easy operation.

The boiler’s case colour is yellow.

The model is available in Light, Automatic, and Electro modifications.

All the modifications of the Celsius 20 boiler use the same fuel and have the same design and specifications. The boilers differ by the delivery package.

Celsius 20 Light is the most affordable model suitable for installation of the automated draught controller to control the temperature of heat-transfer agent and the heating coils that should be purchased separately.

The Automatic and Electro modifications have the automated draught controller with temperature control for the heat-transfer agent supplied together with the boiler.

Electro is the fullest modification of the boiler delivered with the automated draught controller to control the temperature of heat-transfer agent and the heating coils set of 6 kW capacity.

If you would like to install the heating coils by yourself, we recommend you to use the TMF’s certified equipment. Installation of suitable heating coils manufactured by third-party is also technically possible to heat the heat-transfer agent in the heating systems.

The total capacity of the heating coils should not exceed the values recommended by the manufacturer in order to maintain normal operation of the boiler.

Show all
Specifications
Volume of the heated room (max) 486 m3
Fuel type Wood/coal
Volume of the firebox 7,5 l
Power 20 kW
Mass 131 kg
Continuous burning function Yes
Maximum log length 325 mm
Dimensions (L×W×H) 640х580х810 mm
Chimney diameter 120 mm
Minimum chimney height 6 m
Water circuit contour 50 l
Show all

Celsius 20

  • Overview
  • More

Celsius, a new solid fuel water-heating boiler, is TMF’s pit-type boiler of prolonged burning with a capacity of 20 kW

The only difference from the previous Celsius is its capacity.

Duration of the boiler burning using one full fuel load may reach 12 hours.

Thanks to the prolonged stable burning, frequency of a new fuel load is reduced to minimum.

It is the main advantage of the boiler.

The customer is not distracted from his/her businesses or rest by adding fuel to the boiler very often.

Celsius boilers are designed for water heating of single-family houses and utility buildings equipped with water heating systems with forced circulation of a heat-transfer agent under operating pressure of 0.3 mPa (3 kg/cm²) maximum.

The boiler is able to heat multi-storey buildings with premises of irregular shape.

Celsius has an integrated flue heat-exchanger with vertical pipes

The vertical pipes of the heat-exchanger provide efficient intake of the stack gases’ temperature, which increase water heating before supplying it to the heating main.

The boiler’s body covered with a heat insulation material in order to increase its energy performance. Boiler’s coefficient of efficiency is 90%.

Prior to release, each TMF’s boiler is put through the hydraulic-pressure test to estimate its air-tightness and durability of the welded joints providing high quality and reliability of all the goods.

There are three doors in the boiler: for fuel load, heat exchanger cleaning and for boiler ignition. Each door has its own locking mechanism.

Snap for the load door and a thumb nut on the heat-exchanger’s door providing its tight fixing.

Large easy-to-use door of the heat-exchanger makes it easy to clean.

Remove the lid located behind the furnace in order to remove deposition remaining at the boiler’s bottom after cleaning of the heat-exchanger. Remove the ash drawer beforehand.

Ignition door is covered with refractory plates in order to protect it from overheating caused by direct fire impact.

It also provides protection from burns if you accidentally touch the door.

Primary and secondary air is supplied through the damper in the fire door ensuring the boiler’s operation.

All the doors have sealing on the edges. It should be particularly mentioned that the 18 mm sealing thread of the two upper doors ensures their tight and safe adjoining to the boiler’s body.

Colour coding of the thread and the areas of its adjoining with the body is the additional warranty of a safe and precise fixing of all the doors. The doors are set precisely according to the colour coding when closed.

There is a handle of regular-acting gate valve for stack gases inside the boiler in the right upper corner of the body.

It is turned by the fast ignition and heating of the furnace and flue pipe until there is draught for further operation of Celsius.

There are holes with damper for tertiary air supply in the middle of the side walls. It is designed to control the flame’s colour.

The values of the flame’s colour are provided in the Operating Manual.

There is the heat-resistant plate in the area of tertiary air supply for additional protection of the boiler’s body from high heat and its deformation. It has positive effect for the service life of the boiler.

Celsius is equipped with the cleaning mechanism (poker) in order to clean the furnace grate from combustion products.

Unlike its competitors, the poker of the new boiler cleans all the openings between bars of the furnace bar evenly.

During operation of the equipment using coal it is necessary to shake the furnace bar up by pokers’ handle in order to avoid clogging and insufficient air supply.

Therefore ash and slag falls through the furnace bar directly into the ash drawer.

There is the folding-back gate with holes in order to eliminate falling of the burning fuel when opening the furnace’s door.

In order to light the boiler open the door or light the boiler through it. It also provides access to the furnace bar for its thorough cleaning by the slag cutter, for example.

An easy-to-use poker with double side axial bearing is supplied together with the boiler. It is designed for cleaning pipes of the heat-exchanger using its half-round side and cleaning the flat boiler’s walls using the second curved side.

The boiler is equipped with thermometer, which measures temperature of the heat-transfer agent, for safe and easy operation.

The boiler’s case colour is yellow.

The model is available in Light, Automatic, and Electro modifications.

All the modifications of the Celsius 20 boiler use the same fuel and have the same design and specifications. The boilers differ by the delivery package.

Celsius 20 Light is the most affordable model suitable for installation of the automated draught controller to control the temperature of heat-transfer agent and the heating coils that should be purchased separately.

The Automatic and Electro modifications have the automated draught controller with temperature control for the heat-transfer agent supplied together with the boiler.

Electro is the fullest modification of the boiler delivered with the automated draught controller to control the temperature of heat-transfer agent and the heating coils set of 6 kW capacity.

If you would like to install the heating coils by yourself, we recommend you to use the TMF’s certified equipment. Installation of suitable heating coils manufactured by third-party is also technically possible to heat the heat-transfer agent in the heating systems.

The total capacity of the heating coils should not exceed the values recommended by the manufacturer in order to maintain normal operation of the boiler.

«Celsius 20 » modifications
Here's other excellent stoves
  • Aquarius

    Каминная топка с теплообменником 

  • Pragmatik 30

    Линейка отопительных твердотопливных водогрейных котлов

  • Student Hydraulic

    Линейка твердотопливных водогрейных котлов

  • Engineer Hydraulic

    Линейка твердотопливных водогрейных котлов

  • Tashkent 2017, 16

     Линейка твердотопливных водогрейных котлов <p> </p>

  • Tashkent 2017, 12

     Линейка твердотопливных водогрейных котлов

  • Tashkent 2017, 20

     Линейка твердотопливных водогрейных котлов

  • Optimus 20

    Линейка твердотопливных отопительных водогрейных котлов

  • Optimus Gas 20

    Линейка мультитопливных отопительных водогрейных котлов

  • Celsius 25

    Линейка твердотопливных отопительных водогрейных котлов длительного горения шахтного типа

  • Optimus 16

    Линейка твердотопливных отопительных водогрейных котлов

  • Optimus 25

    Линейка твердотопливных отопительных водогрейных котлов

  • Celsius 16

    Линейка твердотопливных отопительных водогрейных котлов длительного горения шахтного типа

  • Garmoshka INOX

    Отопительная компактная печь-камин

  • Germa

    Отопительная колпаковая печь

  • Normal

    Отопительная печь

  • Normal Turbo

    Гибрид дровяной отопительной печи и электрической тепловой пушки

  • Battery fire 5

    Линейка отопительных печей нового поколения

  • Battery fire 5 Light

    Эконом-версия линейки дровяных отопительных печей

  • Battery fire 7

    Линейка отопительных печей нового поколения

  • Battery fire 7 Light

    Эконом-версия линейки дровяных отопительных печей

  • Battery fire 9

    Линейка отопительных печей нового поколения

  • Battery fire 9 Light

    Эконом-версия линейки дровяных отопительных печей

  • Battery fire 11

    Линейка отопительных печей нового поколения

  • Battery fire 11 Light

    Эконом-версия линейки дровяных отопительных печей

  • Gymnasist

    Линейка твердотопливных воздухогрейных котлов

  • Docent

    Линейка твердотопливных воздухогрейных котлов

  • Engineer

    Линейка твердотопливных воздухогрейных котлов

  • Professor

    Линейка твердотопливных воздухогрейных котлов

  • Student

    Линейка твердотопливных воздухогрейных котлов

  • Selenga

    Дровяная отопительно-варочная печь в восточном стиле

  • Yauza

    Отопительно-варочная печь-камин

  • Engineer Ugol

    Линейка угольных воздухогрейных котлов

  • Professor Ugol

    Линейка угольных воздухогрейных котлов

  • Student Ugol

    Линейка угольных воздухогрейных котлов

  • Statiсa Tetra

    Линейка отопительно-варочных печей-каминов

  • Statiсa Sexta

    Линейка отопительно-варочных печей-каминов

  • Statiсa Quinta

    Линейка отопительно-варочных печей-каминов

  • Cinderella 2016

    Обновленная маленькая отопительно-варочная печь

  • Cinderella 2016 Light

    Эконом-версия маленькой отопительной печи

  • Statiсa Tetra Mini

    Линейка отопительно-варочных печей-каминов

  • Safari

    Дровяная отопительная печь-камин с каменной закладкой

  • Valerian 8

    <p> Дровяная отопительная печь  </p>

  • Valerian 15

    <p> Дровяная отопительная печь </p>

  • Valerian 20

    <p> Дровяная отопительная печь </p>

  • Aquarius

    Каминная топка с конвективными трубами

  • Centa Pangolin

    Керамико-металлическая дровяная отопительная печь-камин

  • Viziera

    Дровяной камин с полукруглым стеклом

TMF is Number 1 in Russia

Our stoves are the up-to-date and advanced in Russia

We warm inhabitants of 250 cities of Russia and other countries

Fire safety is the mission statement of our stoves

We are the frost-resistant company in Russia

Some of our stoves generate electricity

We could have produced satellites

The best engineering solutions are only used